How to Put Wallpaper Behind the Toilet: A Step-by-Step Guide
Introducing wallpaper behind the toilet can not only enhance the aesthetics of your bathroom but also provide a sense of privacy and cleanliness. However, installing wallpaper in this area can be challenging due to moisture and humidity. This article will provide you with a step-by-step guide on how to put wallpaper behind the toilet, ensuring a successful and long-lasting result.
1. Preparation
Before you begin, gather all the necessary materials and tools. You will need:
– Wallpaper
– Wallpaper paste
– Scissors
– A level
– A straight edge
– A roller
– A brush
– A sponge
– A towel
– A putty knife
– Safety goggles and gloves
2. Clean the Surface
Start by thoroughly cleaning the surface behind the toilet. Remove any dirt, mildew, or mold using a sponge and a mixture of water and mildew cleaner. Allow the surface to dry completely before proceeding.
3. Measure and Cut the Wallpaper
Measure the height and width of the area behind the toilet. Add an extra inch to each measurement to allow for trimming. Cut the wallpaper accordingly, ensuring it is slightly larger than the area you need to cover.
4. Apply Wallpaper Paste
Mix the wallpaper paste according to the manufacturer’s instructions. Apply the paste to the back of the wallpaper using a roller or brush. Ensure the entire surface is covered evenly.
5. Position the Wallpaper
Carefully position the wallpaper behind the toilet, starting from the top. Use a level to ensure the wallpaper is straight. Begin by smoothing out the top edge with your hands, then work your way down.
6. Trim the Edges
Once the wallpaper is in place, use a straight edge and a putty knife to trim the excess wallpaper around the edges. Be sure to keep the wallpaper taut as you trim to avoid air bubbles.
7. Apply Paste to the Walls
Apply wallpaper paste to the wall surface behind the toilet, focusing on the area where the wallpaper will be placed. This will help the wallpaper adhere to the wall more effectively.
8. Attach the Wallpaper to the Wall
Press the wallpaper onto the wall, smoothing out any air bubbles with a roller or brush. Continue working from top to bottom, ensuring the wallpaper is firmly attached to the wall.
9. Clean Up
After the wallpaper has been installed, use a damp sponge to remove any excess paste from the surface. Allow the wallpaper to dry completely before using the bathroom.
10. Maintenance
To maintain the longevity of your wallpaper behind the toilet, clean the area regularly with a mild detergent and water. Avoid using harsh chemicals or abrasive cleaners, as they can damage the wallpaper.
By following these steps, you can successfully install wallpaper behind the toilet, creating a beautiful and functional bathroom space. Remember to take your time and be patient throughout the process to achieve the best results.
