How to Put Crown Vic Front Suspension on F100
Upgrading the front suspension of your Ford F100 can significantly enhance its performance and handling. One popular modification is to install a Crown Victoria front suspension. This article will guide you through the process of how to put a Crown Vic front suspension on an F100, ensuring a smooth and successful installation.
Before you begin, gather all the necessary tools and materials. You will need a jack, jack stands, wrenches, sockets, a socket set, a pry bar, a hammer, a ratchet, and a torque wrench. Additionally, you’ll need the Crown Vic front suspension kit, which includes the control arms, ball joints, sway bar, and other necessary components.
Step 1: Preparation
Start by parking your F100 on a flat, level surface. Chock the wheels to prevent them from rolling. Raise the front of the vehicle using a jack and secure it with jack stands. Remove the wheels and tire assembly.
Step 2: Removing the Old Suspension
Loosen the bolts that secure the control arms to the frame and the sway bar to the control arms. Use a pry bar and a hammer to gently remove the control arms from the frame. Once the control arms are free, disconnect the sway bar from the control arms. Remove the ball joints from the control arms and the steering knuckles.
Step 3: Installing the Crown Vic Control Arms
Position the Crown Vic control arms over the frame and secure them with the bolts provided. Tighten the bolts to the manufacturer’s specifications using a torque wrench. Install the ball joints into the control arms and secure them with the bolts and cotter pins. Attach the sway bar to the control arms using the bolts and nuts provided.
Step 4: Reinstalling the Steering and Tie Rods
Reattach the steering knuckles to the control arms and secure them with the bolts and nuts. Install the tie rod ends and adjust the tie rod length to match the Crown Vic suspension. Tighten all the bolts and nuts to the manufacturer’s specifications.
Step 5: Reinstalling the Wheels and Tire Assembly
Place the wheels and tire assembly back onto the F100 and lower the vehicle using the jack. Remove the jack stands and ensure the vehicle is stable. Tighten the lug nuts to the manufacturer’s specifications.
Step 6: Final Adjustments and Testing
Check the alignment and adjust the toe and camber settings as needed. Test drive the vehicle to ensure that the new suspension is functioning correctly and that there are no noises or vibrations.
By following these steps, you can successfully install a Crown Vic front suspension on your Ford F100. This upgrade will provide improved handling, stability, and overall performance. Enjoy your enhanced ride!
