How to Put a Hand Held Shower Head On: A Step-by-Step Guide
Installing a hand held shower head can be a simple and rewarding DIY project, providing you with the flexibility and convenience of using a shower head that can be held in your hand or mounted on the wall. Whether you’re replacing an old shower head or adding a new feature to your bathroom, here’s a step-by-step guide on how to put a hand held shower head on.
Step 1: Gather the Necessary Tools and Materials
Before you begin, make sure you have all the necessary tools and materials. You’ll need a hand held shower head, a screwdriver, plumber’s tape, a wrench, and a bucket to catch any water that may spill during the installation.
Step 2: Turn Off the Water Supply
Before you start working on the shower, it’s crucial to turn off the water supply to prevent any water from escaping during the installation. Locate the shut-off valves, usually located behind the shower, and turn them clockwise to close them.
Step 3: Remove the Old Shower Head
Using a screwdriver, remove the screw or nut that holds the old shower head in place. If the shower head is a fixed one, you may need to use a wrench to loosen the nut. Once the screw or nut is loose, carefully remove the old shower head from the shower arm.
Step 4: Inspect the Shower Arm
Check the shower arm for any signs of damage or corrosion. If you find any issues, you may need to replace the shower arm before installing the new hand held shower head.
Step 5: Apply Plumber’s Tape
Coat the threads of the shower arm and the threads of the new hand held shower head with plumber’s tape. This will create a watertight seal and prevent leaks.
Step 6: Install the New Hand Held Shower Head
Attach the new hand held shower head to the shower arm by threading it on clockwise. Make sure it is securely fastened and does not wiggle.
Step 7: Connect the Hose
Connect the hose to the hand held shower head by threading it onto the head’s outlet. Ensure that the connection is tight to prevent any leaks.
Step 8: Test the Hand Held Shower Head
Turn the water supply back on and test the hand held shower head. Check for any leaks by running water through the shower head and looking for any signs of water escaping from the connections.
Step 9: Clean Up
If you notice any leaks, tighten the connections and test again. Once you are confident that the hand held shower head is working correctly and there are no leaks, clean up any tools or materials you used during the installation.
Congratulations! You’ve successfully installed a hand held shower head in your bathroom. Enjoy the convenience and flexibility it brings to your showering experience.
